Outdoor gas tank inflation joint card type gas tank inflation flat gas tank inflation valve simple mutual charging joint outdoor camping

Product Name: Long and Flat Tank Mutual Charging Valve (Product does not include gas tanks)
Product weight: 4.5 grams
Product size: 17.5 * 9.5 * 9.5mm
Product material: copper, nitrile rubber
Product packaging: OPP self sealing bag packaging
The product is suitable for mutual inflation between card type gas tanks (long tanks) and threaded gas tanks (flat tanks).
*Inflation steps and precautions
Please make sure to operate in an open outdoor area
1. Prepare a long can and a flat can. One should be as full as possible, and the other should be as empty as possible. Try to select gas cylinders with no pits on the surface.
2. Place the air tank below, install the inflation joint, and then install a relatively full air tank. Press firmly for about 1 minute. (If you want to fill more gas, you can follow the steps below)
3. Remove the relatively full gas cylinder. Press the inflation head to deflate for 10 seconds.
4. Repeat the inflation step again.