Rf Refine MaxCure9 Dental Curing Light Machine Oral Photosensitive Lamp Teeth clean Resin Wireless Filling Dental Equipment

Broad-spectrum

AI Intelligence 1 sec cure

MaxCure9

Curing 2mm Resin In 1s01 Dual intensity mode

P1 P1 High light intensity: 2300-2500mW/cm2

Curing time: 1s.3s

Used for curing orthodontic brackets, post and core and porcelain veneer photosensitive adhesives

P2 standard light intensity: 1000-1200mW/cm2

Curing time: 5S, 10s, 15S, 20S

Used for conventional curing resins

Meet different clinical needs

Enhanced mode

"Enhanced mode" is also called "highlight mode"

The light intensity is constant: 2300-2500mW /cm2

Suitable for fast curing, ensure enough curing depth, better effect

Time setting :1 second, 3 seconds

General mode

Constant intensity: 1000-1200mw/cm2

for most treatment scenarios like teeth flling, restoration etc,

Time setting: 5s, 10s, 15s, 20s

02 Broad-spectrum Curing most materials

Most of the resins on the market use CQ as the photoinitiator, but some resins use two new types of

photoinitiators, diphenylphosphorus oxide or lvocerin, and the new materials containing TPO have a light

absorption peak of 405nm. If you use an ordinary narrow-spectrum light curing machine (wavelength

range: 420nm-480nm), the resin is prone to incomplete curing. And we know that incomplete composite

curing often leads to secondary pulpitis, apical inflammation, and tooth hypersensitivity.

Broad-spectrum

Curing most materials

MaxCure 9 broad-spectrum light curing, newly added the 385- 420nm band, the wavelength range is

385nm-515nm. It can better cure resin materials containing TPO and other emerging photoinitiators, and

is suitable for ideal curing of all resin materials on the market

Higher curing efficiency

STRONG FOCUS

After a full upgrade, MaxCure 9 changes from a single blue light to a blue-violet light, which can truly

cure all light-curing materials

03 Super large battery capacity

lithium battery- International CB certification

MaxCure9 Battery capacity is 85% higher than normal Curing Lights

04 Al Intelligence system Advanced technology

A CONSTANT CURRENT DRIVER

Constant light intensity

Constant light intensity output, stabilizing

the working power

B LIGHT GUIDE AUTOMATIC check

The main unit will detect the light guide and stop the "Er" flashing if the guide

is connected well, or the main unit will close down after 10s flashing.

Well-installed during the period of the error alarm will stop the error alarm

and the lamp will light up instantly when the lamp holder is installed.

C OVERHEATING PROTECTION

Main unit will detect the temperature. The overheating

protection program will run when the curing light reaches

a certain temperature after long time use. It' II keep flashing

until 200s later that it recovers from high-temperature.

D BATTERY PERFORMANCE check

When detect an inconstant power output from battery,

the main unit will stop working to warn with flashing "Er"

E OVERVOLTAGE PROTECTION

With overvoltage adopter, MaxCure 9 is under protection and can' t be charged. The  adapter is recommended.

Charging Blue light

fully charged white light